Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
Instrument Panel Circuit Board: Technical Service Bulletins
Instrument Printed Circuit - Service Tips
INSTRUMENT CLUSTER - PRINTED CIRCUIT SERVICE APPLICATIONS - SERVICE TIPS
Article No. 88-20-4
MERKUR:
1985-88 XR4Ti
ISSUE:
The current printed circuit that includes an integral resistor for the alternator warning lamp circuit is used on 1988 XR4Ti instrument
clusters. This printed circuit can be used to service all XR4Ti units produced after 8/12/85. 1985 XR4Ti units produced on or before
8/12/85 must be serviced with the fuel gauge anti-slosh kit that contains a new printed circuit.
ACTION:
If service is required, refer to the following printed circuit application chart for the correct part application based on the vehicle production
date.
PRINTED CIRCUIT APPLICATION CHART
ENGINE
PRODUCTION
SERVICE
& DESCRIPTION
DATE
PART
83BB-10K843-JC
Before 8/12/85
E5RY-9305-E
No fuel gauge anti-slosh
amplifier
FUEL GAUGE KIT
E5RY-9305-E MUST BE
USED. REFER TO TSB
ARTICLE 85-20-2 FOR
INSTALLATION DETAILS.
85BB-10K843-CA
8/12/85 to 1987
E7RY-10KB43-B
Fuel gauge anti-slosh
amplifier at production
85BB-10K843-CB
1988 All
E7RY-10K843-B
Integral resistor added
NOTE:
VEHICLES BUILT BEFORE 8/12/85 THAT HAVE BEEN REWORKED PER TSB 85-20-2 WITH A FUEL GAUGE ANTI-SLOSH
MODULE KIT CAN NOW BE SERVICED WITH THE NEW PRINTED CIRCUIT E7RY-10K843-B.
PART NUMBER
PART NAME
CLASS
E5RY-9305-E
Fuel Gauge Kit
RG
E7RY-10K843-B
Printed Circuit
C
OTHER APPLICABLE ARTICLES: 85-20-2, 87-6-7
WARRANTY STATUS:
"INFORMATION ONLY"