Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
3.
Starting with zero air pressure, slowly increase the air pressure until the actuator arm moves about 0.38 mm (0.015 inch). The pressure gauge
should read between 32-35 kPa (9.5 and 10.5 psi).
4.
If the reading is not within specification, or if no movement is measured at 10.5 psi, replace the turbocharger assembly.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP9438A85
TIME:
1.7 Hrs. DLR. CODING: Basic Part No. 9G438 - Code: 41