Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
Control Arm Bushing: Service and Repair
REMOVAL
1.
Remove control arm as previously described.
2.
Using drawbolt T78P-5638-A1, receiver cup T85M-5638-A2, a {7/16} inch 20 UNF hex nut and a {7/16} inch flat washer, or equivalents,
remove larger control arm bushing.
3.
Using drawbolt T78P-5638-A1, receiver cup T85M-5638-A1, a {7/16} inch 20 UNF nut and a {7/16} inch flat washer, or equivalents, remove
smaller control arm bushing.
INSTALLATION
1.
Lubricate bushings with suitable non-petroleum lubricant.
2.
Using drawbolt T78P-5638-A1, replacer cup T85M-5638-A3, a {7/16} inch 20 UNF nut and a {7/16} inch flat washer, or equivalents install new
larger control arm bushing.
3.
Using drawbolt T78P-5638-A1, replacer cup T78P-5638-A3, a {7/16} inch 20 UNF nut and a {7/16} inch flat washer, or equivalents, install new
smaller control arm bushing.