Milan L4-2.3L VIN Z (2006)
6.
Add two (2) pieces of 19/32" X 19/32" (15 mm x 15 mm) flock tape 164-R4903 (Figure 6). Use PVC foam 164-R4901 from Rotunda Squeak and
Rattle Repair Kit (164-R4900) if flock tape is not available.
7.
Reinstall inner release handle using the WSM, Section 501-14.
8.
Remove white foam blocks off the door if they are on the door (Figure 7).
9.
Reinstall door trim panel using the WSM, Section 501-05.
NOTE
USE A RUBBER MALLET WITH LIGHT PRESSURE TO ENSURE ALL PUSH PIN LOCATIONS ARE FULLY SEATED
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
061416A
2006 Fusion/Milan: Follow
0.6 Hr.
Service Procedure To
Repair (Includes Time To
Remove And Install Interior
Door Trim Panel On One
Front Door (Do Not Use
With 23943A, 23943A2,
23943A4, 27406B,
27406B2, 27406B4)
061416B
2006 Fusion/Milan: Follow
1.0 Hr.
Service Procedure To
Repair (Includes Time To
Remove And Install Interior
Door Trim Panels On Both
Front Doors (Do Not Use
With 23943A, 23943A2,
23943A4, 27406B,
27406B2, 27406B4)