Milan L4-2.3L VIN Z (2006)
![background image](/mercury/milan/l4-2.3l_vin_z/Page-1641004.png)
Broken wire strands in harness
1
= Wiring harness tape
2
= Wiring strand
3
= Broken strands intermittent signal
4
= Circuit insulation
Remove the tape and flex/feel each circuit for a reduction in diameter at break
Recommended splicing method - Solder (For 16AWG and Smaller Diameter Wire Only)
1. Disconnect battery ground cable.
2. Strip wires to appropriate length.
3. Install heat shrink tubing.
4. Twist wires together.