Milan AWD L4-2.3L (2008)
Removal and Installation
1. NOTE: RH side shown, LH side similar.
Remove the front door handle bezel screw cover.
2. Remove the front door inside handle bezel screw.
3. Remove the front door inside handle bezel.
-
Lift upward on the rear of the front door inside handle bezel.
-
Disconnect the electrical connector.
4. Remove the front door handle screw cover.
5. Remove the front door handle screw.
6. Remove the front door trim panel upper screw.
7. Remove the front door trim panel lower screw.