mercury Workshop Repair Guides

Mercury Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Thermostat Bypass Hose: Service and Repair

Bypass Tube - 2.3L

 

Bypass Tube - 2.3L

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Remove the intake manifold.
4. Disconnect and remove the coolant bypass tube from the engine.
5. To install, reverse the removal procedure.
6. Fill and bleed the cooling system.

Engine, Cooling and Exhaust > Cooling System > Thermostat Bypass Hose > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >