Workshop Manuals Factory service & repair Mercury
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Mercury Milan FWD L4-2.3L VIN Z (2007)03 · Maintenance
03 · Maintenance

Alignment: Specifications (page 5 of 5)

Make
Mercury
Model
Milan FWD
Engine
L4-2.3L VIN Z
Year
2007
Section
Alignment
MaintenanceSpecifications · page 5 of 5
background image

Incorrect Thrust Angle (Dogtracking)

Incorrect thrust angle (dogtracking) is the condition in which the rear axle is not square to the chassis. Heavily crowned roads can give the illusion of
dogtracking.

Wander

Wander is the tendency of the vehicle to require frequent, random left and right steering wheel corrections to maintain a straight path down a level
road.

Shimmy

Shimmy, as observed by the driver, is large, consistent, rotational oscillations of the steering wheel resulting from large, side-to-side (lateral)
tire/wheel movements.

Shimmy is usually experienced near 64 km/h (40 mph), and can begin or be amplified when the tire contacts pot holes or irregularities in the road
surface.

Nibble

Sometimes confused with shimmy, nibble is a condition resulting from tire interaction with various road surfaces and observed by the driver as small
rotational oscillations of the steering wheel.

Poor Returnability/Sticky Steering

Poor returnability and sticky steering is used to describe poor return of the steering wheel to center after a turn or steering correction.

Drift/Pull

Pull is a tugging sensation, felt by the hands on the steering wheel, that must be overcome to keep the vehicle going straight.

Drift describes what a vehicle with this condition does with hands off the steering wheel.
-

A vehicle-related drift/pull, on a flat road, will cause a consistent deviation from the straight-ahead path and require constant steering input in the
opposite direction to counteract the effect.

-

Drift/pull may be induced by conditions external to the vehicle (for example, wind, road crown).

-

A drift or pull condition may exist even if the front alignment is within specifications. To aid in correcting this condition, there are 4 additional
upper control arms available with off-set bushings (2 for LH, 2 for RH). These upper control arms will allow the caster to be adjusted ±0.4
degrees
. Refer to Caster Adjustment - Front.

Poor Groove Feel

Poor groove feel is characterized by little or no buildup of turning effort felt in the steering wheel as the wheel is rocked slowly left and right within
very small turns around center or straight-ahead (under 20 degrees of steering wheel turn). Efforts may be said to be "flat on center."
-

Under 20 degrees of turn, most of the turning effort that builds up comes from the mesh of gear teeth in the steering gear. In this range, the
steering wheel is not yet turned enough to feel the effort from the self-aligning forces at the road wheel or tire patch.

-

In the diagnosis of a roadability problem, it is important to understand the difference between wander and poor groove feel.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2007 Mercury Milan 2.3L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.