Milan FWD L4-23L VIN Z (2007) Seat Occupant Classification Module
3. Disconnect the electrical connector and remove the OCS module.
4. To install, reverse the removal procedure.
5. Install the passenger seat and repower the supplemental restraints system (SRS). Do not prove out the SRS at this time.
6. Carry out the appropriate procedure after installation of an OCS system component.
-
If installing the original OCS system component, carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove
out the SRS. See: Restraint Systems/Air Bag Systems/Testing and Inspection/Component Tests and General Diagnostics/Occupant
Classification Sensor (OCS) System Zero Seat Weight Test
-
If installing a new OCS system component, carry out the Occupant Classification Sensor OCS) System Reset procedure and prove out the SRS.
See: Restraint Systems/Air Bag Systems/Service and Repair/Occupant Classification Sensor (OCS) System Reset