Milan FWD L4-2.5L (2010)
![background image](/mercury/milan_fwd/l4-2.5l/Page-2551001.png)
Sunroof / Moonroof Track: Service and Repair
Trough Assembly
Trough Assembly
Removal and Installation
1. Remove the roof opening panel glass. For additional information, refer to Roof Opening Panel Glass See: Sunroof / Moonroof Panel/Service and
Repair/Roof Opening Panel Glass.
2. Remove the trough assembly.
-
Pull the trough assembly arms outward to release the trough assembly guide arm pins from the roof opening panel frame to remove.
3. To install, reverse the removal procedure.
-
Verify that the roof opening panel glass is centered and aligned before tightening the roof opening panel glass screws. For additional
information, refer to Roof Opening Panel Alignment See: Adjustments/Roof Opening Panel Alignment.
-
Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.