Milan FWD L4-2.5L (2010)
Head Rest: Service and Repair
Head Restraint Guide Sleeve
Removal
NOTE: Typical head restraint guide sleeve shown, others similar.
1. Push in on the 2 head restraint guide sleeve release buttons and remove the head restraint.
2. Obtain a flat-head screwdriver with a width of 4 mm (0.157 in) to 7 mm (0.275 in) and a thickness of approximately 1 mm (0.039 in).
3. Align the screwdriver to the middle of the head restraint guide sleeve release button.
4. Position the screwdriver between the head restraint guide sleeve neck and backrest trim cover and foam pad.