Milan FWD L4-2.5L (2010)
3. Remove the 11 evaporator core cover screws.
4. Separate the 2 halves of the heater core and evaporator core housing.
5. Remove the dash panel seal.
6. Remove the 2 LH temperature blend door actuator screws and detach the actuator.
Dual-zone Electronic Automatic Temperature Control (EATC) vehicles
7. Remove the 2 RH temperature blend door actuator screws and detach the actuator.
8. Remove the 2 temperature blend doors.
Electronic Manual Temperature Control (EMTC) vehicles
9. Remove the temperature blend door.
All vehicles
10. Remove the heater core and evaporator core housing divider from the heater core and evaporator core housing.
11. Remove the evaporator core.
12. NOTICE: Motorcraft(R) Electric A/C Compressor Oil only must be used as a refrigerant system lubricant for hybrid vehicles. Addition
of any oil other than Motorcraft(R) Electric A/C Compressor Oil to the hybrid vehicle refrigerant system will damage the electric Air
Conditioning (A/C) compressor and contaminate the refrigerant system.
To install, reverse the removal procedure.
-
Add the correct amount of clean PAG oil (non-hybrid) or electric A/C compressor oil (hybrid) to the refrigerant system.