Milan FWD L4-2.5L (2010)
3. Remove the luggage compartment lid trim panel.
4. Remove the 2 rubber access covers.
5. Remove the 2 screws and the high mounted stoplamp.
-
Disconnect the electrical connector.
Luggage compartment lid mounted
6. Remove the luggage compartment lid trim panel.
7. Remove the 4 nuts and the luggage compartment lid moulding.
-
Disconnect the electrical connectors.
8. Remove the 4 nuts and the high mounted stoplamp bracket.
9. Release the 2 tabs and remove the high mounted stoplamp.
-
Disconnect the electrical connector.
All vehicles
10. To install, reverse the removal procedure.