Milan FWD L4-2.5L (2010)
![background image](/mercury/milan_fwd/l4-2.5l/Page-2832002.png)
1. Remove the instrument panel side finish panel.
2. NOTE: The headlamp switch bezel is removed by pushing from behind.
Release the tabs and remove the headlamp switch and bezel assembly.
-
Disconnect the electrical connector.
3. NOTE: The 3 retaining tabs on the headlamp switch are located at approximately the 3, 6 and 11 o'clock positions when viewed from the front.
Release the tabs and separate the headlamp switch from the bezel.
4. To install, reverse the removal procedure.