mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3203 > < Initial Inspection and Diagnostic Overview|Page 3201
Page 96
background image

No

CONNECT the negative battery cable. GO to AC62.

-------------------------------------------------
AC21 VERIFY VEHICLE EQUIPMENT - DSM

 

-

Verify whether the vehicle is equipped with a Driver Seat Module (DSM).

-

Is the vehicle equipped with a DSM?

Yes

GO to AC22. 

No

GO to AC23.

-------------------------------------------------
AC22 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DSM DISCONNECTED

 

-

Disconnect: DSM C3299d .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to AC23. 

No

CONNECT the negative battery cable. GO to AC63.

-------------------------------------------------
AC23 VERIFY VEHICLE EQUIPMENT - DCSM

 

-

Verify whether the vehicle is equipped with a Dual Climate Controlled Seat Module (DCSM).

-

Is the vehicle equipped with a DCSM?

Yes

GO to AC24. 

No

GO to AC25.

-------------------------------------------------
AC24 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DCSM DISCONNECTED

 

Initial Inspection and Diagnostic Overview|Page 3203 > < Initial Inspection and Diagnostic Overview|Page 3201