Milan FWD L4-2.5L (2010)
11. Release the retainers and remove the fuel tank filler pipe housing.
12. NOTE: Some fuel may remain in the fuel tank filler pipe after the initial drain. Carefully drain any residual fuel into a suitable container.
Release the clamp and disconnect the fuel tank filler pipe hose from the fuel tank.
-
To install, tighten to 4 Nm (35 lb-in).
13. NOTE: The fuel tank filler pipe assembly has to be directed upward and partially out of the fuel door opening, then it can be lowered and
removed from the vehicle.
Remove the fuel tank filler pipe assembly from the vehicle.
14. To install, reverse the removal procedure.