Milan FWD L4-2.5L (2010)
![background image](/mercury/milan_fwd/l4-2.5l/Page-1404025.png)
25. Install the No 2 thrust bearing. See Figure 45.
26. Install the O/D (4, 5, 6) clutch hub. See Figure 46.
27. Soak the new O/D (4, 5, 6) clutch pack in clean automatic transmission fluid. See Figure 47.
28. Install the new O/D (4. 5, 6) clutch pack.
29. Install the O/D (4, 5, 6) clutch pressure plate.
30. Install the O/D (4, 5, 6) clutch snap ring.