Milan FWD L4-2.5L (2010)
Auxiliary Power Outlet: Diagnostic Trouble Code Descriptions
High-Voltage Converter/Inverter
DTC Charts
DC to DC Converter Control Module (DC/DC) DTC Chart
WARNING: To prevent the risk of high-voltage shock, always follow precisely all warnings and service instructions, including instructions to
depower the system. The high-voltage hybrid system utilizes approximately 300 volts DC, provided through high-voltage cables to its
components and modules. The high-voltage cables and wiring are identified by orange harness tape or orange wire covering. All high-voltage
components are marked with high-voltage warning labels with a high-voltage symbol. Failure to follow these instructions may result in serious
personal injury or death.
NOTE: This module utilizes a 5-character DTC followed by a 2-character failure type code. The failure type code provides information about specific
fault conditions such as opens or shorts to ground. Continuous Memory Diagnostic Trouble Codes (CMDTCs) have an additional 2-character DTC status
code suffix to assist in determining DTC history.