Milan FWD L4-2.5L (2010)
Starter Motor: Service and Repair
Starter Motor - 2.5L
Removal and Installation
WARNING: Always disconnect the battery ground cable at the battery before disconnecting the starter motor battery terminal lead. If a tool is
shorted at the starter motor battery terminal, the tool can quickly heat enough to cause a skin burn. Failure to follow this instruction may
result in serious personal injury.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Disconnect the battery ground cable. For additional information, refer to Battery.
3. If equipped, remove the 7 screws and the underbody cover.
4. Remove the starter motor solenoid wire nut and position the wire aside.
-
To install, tighten to 5 Nm (44 lb-in).
5. Position the starter motor solenoid battery cable terminal cover aside.