Milan FWD L4-2.5L (2010)
14. Connect the transaxle electrical connector.
15. Install the underbody cover and the screws.
16. Install the ACL assembly. For additional information, refer to Fuel Delivery and Air Induction.
17. Fill the transaxle with clean transmission fluid.
18. Download a new solenoid body strategy to the PCM. For additional information, refer to Solenoid Body Strategy See: Transmission Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/6F35/Solenoid Body Strategy.
19. Using the scan tool, select Module Programming and Programmable Parameters under the tool box icon and select Transmission. Follow the
instructions displayed on the scan tool.
There are fields to enter the solenoid body 7-digit identification and 13-digit strategy recorded from the solenoid body.
20. NOTICE: If the solenoid body information is not correct, transaxle damage or driveability concerns can occur.
Enter the solenoid body identification and strategy.
The scan tool will verify that the numbers entered are valid and display a message if the information is not valid.
The scan tool checks to see if the file is present on the scan tool. If the file is present, the technician may proceed with downloading the file to the
PCM. If the file is not present, the scan tool will need to be connected to the Professional Technician Society (PTS) server to download the file
onto the scan tool.