Milan FWD L4-2.5L (2010)
-
Support the brake caliper and anchor plate assembly using mechanic's wire.
5. Remove the 2 brake disc bolts and the brake disc.
6. Remove and discard the grease cap.
7. Remove and discard the wheel hub nut and remove the wheel hub and bearing assembly.
All-Wheel Drive (AWD) vehicles
8. Remove the wheel knuckle. For additional information, refer to Wheel Knuckle See: Steering and Suspension/Suspension/Rear Knuckle/Service
and Repair.
9. Using the Step Plate, press the wheel hub from the wheel bearing.