Milan FWD V6-3.0L (2010)
Removal and Installation
All vehicles
1. Remove the liftgate trim panel. For additional information, refer to Auxiliary Step / Running Board.
-
Position the water shield aside.
Fusion
2. Remove the luggage compartment lid panel applique. For additional information, refer to Auxiliary Step / Running Board.
-
Disconnect the electrical connector.
3. Remove the 2 screws and the video camera and bracket assembly.
Milan
4. Remove the high mounted stoplamp.
-
Disconnect the electrical connector.
5. Remove the 2 screws and the video camera and bracket assembly.
MKZ
6. Remove the video camera by prying on the two outer retaining tabs with a suitable tool, such as a flat bladed screwdriver.
-
Disconnect the electrical connector.
All vehicles
7. To install, reverse the removal procedure.
