Milan FWD V6-3.0L (2010)
![background image](/mercury/milan_fwd/v6-3.0l/Page-2588005.png)
2. Align the bolt holes and install the side bolster bolt.
-
Tighten to 11 Nm (97 lb-in).
3. Install the rear seat cushion. Refer to Seat Cushion - Rear See: Seat Cushion - Rear.
2. Align the bolt holes and install the side bolster bolt.
-
Tighten to 11 Nm (97 lb-in).
3. Install the rear seat cushion. Refer to Seat Cushion - Rear See: Seat Cushion - Rear.