Milan FWD V6-3.0L (2010)
Seat Latch: Service and Repair
Seat Backrest Latch - Rear
NOTE: LH side shown, RH side similar.
Removal
NOTE: LH side shown, RH side similar.
All vehicles
1. Remove the parcel shelf from the rear of the vehicle to access the rear backrest latch nuts.
2. NOTE: Make sure the affected backrest is released.
Access the luggage compartment, detach the trim pin-type retainer and position the trim aside.
Non-hybrid vehicles
3. Remove the 2 nuts and detach the latch release handle bracket.
4. Detach the 2 pin-type retainers and latch cable assembly.
-
Note the cable routing for installation.
5. Detach the release cable from the latch and remove.
All vehicles