Milan FWD V6-3.0L (2010)
Cruise Control Switch: Service and Repair
Cruise Control Deactivator Switch
Cruise Control Deactivator Switch
Removal and Installation
1. Disconnect the electrical connector.
2. Rotate the cruise control deactivator switch counterclockwise one-quarter turn.
3. Remove the cruise control deactivator switch.
4. NOTE: When installing the cruise control deactivator switch, it is automatically self-adjusting to the correct position. Do not pull up or push down
on the pedal during installation. Initial installation of the cruise control deactivator switch allows for one adjustment. If additional adjustments are
necessary, install a new switch.
To install, reverse the removal procedure.
