Milan FWD V6-3.0L (2010)
Fan Shroud: Service and Repair
Cooling Fan Motor and Shroud - 2.5L, 3.0L (4V)
2.5L and 3.0L Engines
1. Detach all the wiring harness retainers from the cooling fan and shroud.
2. If equipped, detach the 2 block heater wiring retainers from the cooling fan motor and shroud.
3. Remove the splash shield.
4. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair.
