Milan FWD V6-3.0L (2010)
Engine Control Module: Customer Interest
Engine Controls - RPM Fluctuation On Accel./DTC P061B
TSB 10-4-11
03/15/10
3.0L - RPM FLUCTUATIONS DURING ACCELERATION
IMMEDIATELY FOLLOWING A COLD START -
ENHANCEMENT FOR DTC P061B - BUILT ON OR
BEFORE 12/7/2009
FORD:
2010 Fusion
MERCURY:
2010 Milan
ISSUE
Some 2010 Fusion and Milan vehicles equipped with a 3.0L engine and built on or before 12/7/2009 may exhibit RPM fluctuations during acceleration
immediately following a cold engine start up. This powertrain control module (PCM) calibration update also includes enhancements for diagnostic
trouble code (DTC) P061B.
ACTION
Reprogram the PCM to the latest calibration using IDS release 65.06 and higher. This new calibration is not included in the VCM 2010.1 DVD.
Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100411A
2010 Fusion, Milan 3.0L:
0.3 Hr.
Check DTCs And
Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
04
Disclaimer