Milan FWD V6-3.0L (2010)
-
To install, tighten to 20 Nm (177 lb-in).
8. Position the LH catalytic converter manifold shield and install the 4 bolts.
-
Tighten to 10 Nm (89 lb-in).
9. Tighten the 2 new LH catalytic converter-to-exhaust flexible pipe nuts.
-
Tighten to 40 Nm (30 lb-ft).
10. Connect the HO2S and the CMS electrical connectors.
11. Install the oil level indicator and tube. For additional information, refer to Engine.