Milan FWD V6-3.0L (2010)
5. Disconnect the fuel vapor tube assembly-to-EVAP canister quick connect couplings. For additional information, refer to Fuel Delivery and Air
Induction.
6. Disconnect the vapor tube-to-EVAP canister quick connect couplings. For additional information, refer to Fuel Delivery and Air Induction.
7. Remove the 2 nuts, 2 bolts and the EVAP canister assembly.
-
To install, tighten to 6 Nm (53 lb-in).
8. To install, reverse the removal procedure.
-
Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test See:
Testing and Inspection.