Milan FWD V6-3.0L (2010)
Positive Crankcase Ventilation Valve: Service and Repair
Positive Crankcase Ventilation (PCV) Valve
Removal and Installation
1. Release the clamp and disconnect the crankcase ventilation tube from the PCV valve.
2. NOTICE: A new Positive Crankcase Ventilation (PCV) valve must be installed if removed from the valve cover. Damage will occur to the
locking mechanism on the PCV valve.
NOTE: To install, apply clean engine oil to the O-ring seal.
Rotate counterclockwise and remove the PCV valve from the valve cover.
-
Discard the PCV valve.
3. To install, reverse the removal procedure.
-
Install a new PCV valve.