Milan FWD V6-3.0L (2010)
![background image](/mercury/milan_fwd/v6-3.0l/Page-56001.png)
Seat Heater Control Module: Service and Repair
Heated Seat Module
Heated Seat Module
Removal and Installation
1. Remove the front passenger seat. For additional information, refer to Seat - Front See: Body and Frame/Seats/Service and Repair/Seat - Front.
2. Remove the heated seat module from the cushion electrical bracket.
-
Disconnect the 2 heated seat module electrical connectors.
-
Remove the rivet and heated seat module.
3. To install, reverse the removal procedure.