Milan FWD V6-3.0L (2010)
4. Remove the safety belt buckle through the opening in the seat cushion cover.
5. To install, reverse the removal procedure.
-
For correct installation, make sure the safety belt buckle is routed through the seat cushion cover.
6. Install the seat. If the passenger seat has been serviced, do not prove out the SRS at this time. For additional information, refer to Seats.
Passenger seat
7. Carry out the Occupant Classification Sensor (OCS) System Reset. For additional information, refer to General Procedures in Restraint Systems.
All seats
8. Check the active restraint system for correct operation. For additional information, refer to the appropriate Functional Test procedure in Safety
Belt System See: Testing and Inspection/Component Tests and General Diagnostics.
