Milan FWD V6-3.0L (2010)
3. Tighten the upper arm-to-body bolts to 55 Nm (41 lb-ft) and remove the drill bit.
4. Position the shock and spring assembly and install the 3 new shock upper mount nuts.
-
Tighten to 30 Nm (22 lb-ft).
5. Position the upper ball joint and install a new nut.
-
Tighten to 48 Nm (35 lb-ft).
6. Position the wheel speed sensor harness and install the bolt.
-
Tighten to 23 Nm (17 lb-ft).
7. Position the wheel speed sensor and install the bolt.
-
Tighten to 23 Nm (17 lb-ft).
8. Install the wheel and tire. For additional information, refer to Wheels and Tires.
9. Check and, if necessary, align the front end. For additional information, refer to Suspension &/or Alignment.