Milan FWD V6-3.0L (2010)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the Air Cleaner (ACL) and the outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the battery and battery tray. For additional information, refer to Battery.
4. Remove the 4 screws and position the LH fender splash shield aside.
5. Remove the 6 pin-type retainers and the LH front structure-to-subframe splash shield.