Milan FWD V6-3.0L (2010)
Valve Body: Service and Repair
Aisin AW21 - Main Control Valve Body
Main Control Valve Body
Removal
NOTICE: The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the screws and the underbody cover.
3. Remove the transmission fluid drain plug and allow the transmission fluid to drain.
4. Disconnect the transmission fluid cooler tubes at the transaxle and position the tubes aside.
5. Remove and discard the transmission fluid pan bolts and remove the pan.