Milan FWD V6-3.0L (2010)
2. Working under the instrument panel, connect the clutch switch (cruise control cancel) electrical connector.
3. Install the clutch master cylinder nut and the clutch pedal bracket nut.
-
Tighten to 21 Nm (15 lb-ft).
4. Connect the CPP electrical connector.
5. Install the clutch master cylinder nut.
-
Tighten to 21 Nm (15 lb-ft).
6. Install the PCM bracket and the 3 PCM bracket nuts.
-
Tighten to 10 Nm (89 lb-in).
7. Install the PCM.
1. Install the 2 PCM bolts.
-
Tighten to 10 Nm (89 lb-in).
2. Connect the electrical connectors.
8. Install the battery tray and the battery. For additional information, refer to Battery.