Montego 2WD V6-3.0L VIN 1 (2006)
Brake Rotor/Disc: Specifications
Brake Disc
Front brake disc minimum thickness ...................................................................................................................................................... 26.5 mm (1.04 inch)
Rear brake disc minimum thickness ...................................................................................................................................................... 10.0 mm (0.394 inch)
Minimum thickness to machine front brake disc .................................................................................................................................... 27.1 mm (1.07 inch)
Minimum thickness to machine rear brake disc .................................................................................................................................... 10.6 mm (0.417 inch)
Lateral runout and disc thickness variation measurements are not required because correct adjustment of the on-vehicle brake lathe will make sure that
these dimensions are within specifications.