Montego AWD V6-3.0L VIN 1 (2005)
Rear Bumper Cover / Fascia: Service and Repair
REAR BUMPER COVER-FIVE HUNDRED, MONTEGO
Five Hundred, Montego
Exploded View
Removal and Installation
1. Remove the rear lamps.
2. Remove the 6 rear bumper cover screws.
-
To install, tighten to 2 Nm (18 lb-in).
3. From inside the luggage compartment, remove the luggage compartment trim panel.
4. Remove the 3 rear bumper cover pin-type retainers.
5. Remove the 6 rear bumper cover nuts.
-
To install, tighten to 9 Nm (80 lb-in).
6. If equipped, disconnect the rear parking aid electrical connector.
7. NOTE: The forward upper portion of the bumper cover must be pulled outward to unclip it from body.
Remove the rear bumper cover.