Montego AWD V6-3.0L VIN 1 (2005)
Front Door Panel: Service and Repair
FRONT DOOR TRIM PANEL
Removal and Installation
1. Remove the exterior mirror trim cover.
2. Disconnect the exterior mirror control switch electrical connector.
3. Remove the front door handle bezel screw cover.
4. Remove the front door handle bezel screw.
5. Remove the front door handle bezel.
6. Remove the 2 front door handle trim cover screws.
7. Remove the 6 front door trim panel screws.
8. Position the front door trim panel by pulling straight away from the front door to release the retaining clips.
9. Disconnect the power window/door lock switch electrical connector.
10. If equipped with power memory seat, disconnect the power memory seat electrical connector.
11. Remove the front door trim panel.
