Montego AWD V6-3.0L VIN 1 (2005)
b)
Disengage the tab from the latch, then remove and discard the shield. See Figure 1.
2.
NOTE: The rain hats are embossed with an "L" or an "R" to identify on which side of the vehicle they are to be installed. See Figure 2.
NOTE:
BE SURE TO INSTALL THE PUSHPIN INTO THE RAIN HAT FIRST, then install the rain hat onto the door latch.
Insert the supplied pushpin into the rain hat. See Figure 2.
3.
Install the rain hat as follows: