Montego AWD V6-3.0L VIN 1 (2005)
16. Remove 2 bolts, route the cable out of the cushion frame and remove the RH backrest latch.
-
To install, tighten to 50 Nm (37 lb-ft).
17. Remove the 2 bolts from the LH floor latch.
-
To install, tighten to 23 Nm (17 lb-ft).
18. Remove the 2 bolts from the RH floor latch and remove the floor latch assembly.
-
To install, tighten to 23 Nm (17 lb-ft).
19. Separate the pivot release cable and casing from the pivot tube release lever and bracket. Remove the pivot release cable.
20. Remove 8 bolts and the cushion frame.
-
To install, tighten to 50 Nm (37 lb-ft).
21. Remove the bolt and the LH safety belt buckle.
-
To install, tighten to 37 Nm (27 lb-ft).