mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Vehicle Lifting|Description and Operation
Page 2
background image

Lifting Points - Drive-On Lift

CAUTION:  To prevent possible damage to the underbody, do not drive the vehicle onto the drive-on lift without first checking for possible
interference.

Check for interference between the upright flanges of the lift rails and the underbody.

If an interference exists, modify the hoist flanges or build up the approach ramps as necessary to provide clearance.

Lifting Points - Frame Contact Lift, Single-Post Lift, Two-Post Lift

WARNING:  All 4 hoist contact points must contact the designated vehicle lifting locations. Using other areas to lift the vehicle may cause
damage to the vehicle or personal injury. Failure to follow these instructions may result in personal injury.

CAUTION:  Under no circumstances should the vehicle be lifted by the front control arms or rear control arms. Severe damage to the vehicle
could result.

NOTE:  Adapters may be necessary to clear vehicle components to lift the vehicle safely. The adapters must be placed at the 4 designated contact
points. Position the adapters so they are centered on the adapter contact area.

Lifting Points

Lift the vehicle at the applicable lift points.

Engine, Cooling and Exhaust > < Vehicle Lifting|Description and Operation