Montego AWD V6-3.0L VIN 1 (2005)
Seat Belt Retractor: Service and Repair
Safety Belt Retractor - Rear, Center
SAFETY BELT RETRACTOR - REAR, CENTER
Removal and Installation
WARNING: All safety belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), if equipped, shoulder
safety belt height adjusters, if equipped, child safety seat tether bracket assemblies, if equipped, and attaching hardware should be inspected
after any collision. All belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate
properly. Belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted.
The Automatic Locking Retractor (ALR) feature of the safety belt retractor must be checked by a qualified technician to verify that the ALR
feature for a child seat is functioning properly, in addition to the other checks for proper safety belt system function. A belt and retractor
assembly must be replaced if the safety belt assembly's "automatic locking retractor" feature or any other safety belt function is not operating