Montego AWD V6-3.0L VIN 1 (2005)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler
Material
Removal and Installation
CAUTION: When repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power
steering components can result.
1. Remove the radiator grille.
2. Release the clamp and disconnect the power steering return line-to-fluid cooler hose.
^
Allow the fluid to drain into a suitable container.
3. Release the clamp and disconnect the power steering fluid cooler-to-reservoir hose.
4. Remove the 2 bolts and the power steering fluid cooler.
^
To install, tighten to 6 Nm (53 inch lbs.).
5. To install, reverse the removal procedure.
^
Fill the power steering system.