mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seals and Gaskets, A/T > < Neutral Position Learning|Page 5660
Page 3
background image

4. Install the manual control lever nut.

^

Tighten to 12 Nm (9 ft. lbs.).

5. Connect the TCM electrical connector.

6. CAUTION:  Be careful not to bend the manual control lever when installing the shift cable.

Connect the shift cable end.

7. Install the air cleaner assembly. 
8. Connect the battery ground cable. 
9. Check for correct vehicle operation.

Seals and Gaskets, A/T > < Neutral Position Learning|Page 5660