Montego AWD V6-3.0L VIN 1 (2005)
8. Install 2 new nuts for the rear exhaust pipe.
^
Tighten to 40 Nm (30 ft. lbs.).
9. Install 2 new nuts for the front exhaust pipe.
^
Tighten to 40 Nm (30 ft. lbs.).
10. Install the RH halfshaft.
11. Install the driveshaft cross brace.
^
Tighten to 25 Nm (18 ft. lbs.).
12. NOTE: Align the index-marks made during removal.
NOTE: Use a crisscross pattern to tighten the bolts.
Using new bolts, install the driveshaft flange.
^
Tighten to 25 Nm (18 ft. lbs.).