Montego AWD V6-3.0L VIN 1 (2005)
3. Install the shift knob and bolt.
^
Tighten to 10 Nm (89 inch lbs.).
4. Slide the lower shift knob bezel up and snap it into place.
5. Install the upper console panel.
6. Install the PRNDL trim ring.
3. Install the shift knob and bolt.
^
Tighten to 10 Nm (89 inch lbs.).
4. Slide the lower shift knob bezel up and snap it into place.
5. Install the upper console panel.
6. Install the PRNDL trim ring.