Monterey V6-4.2L VIN 2 (2004)
19.
Install four (4) new pushpin screw/rivets to secure the upper cowl to the lower cowl. Add Clear Silicone Rubber to the four (4) pushpin
screw/rivets to make a watertight seal around them. (Figure 14)
20.
Add Clear Silicone Rubber to the front seam between the upper and lower cowl in the area above the transaxle. (Figure 15)
21.
Install wiper pivot arms. (Figure 16)
NOTE
APPLY THREADLOCK TO THE PIVOT ARM NUT.
22.
Check the wiper pivot arm adjustment.