Mountaineer V8-302 5.0L VIN P EFI (1998)
Lock Cylinder Switch: Service and Repair
Anti-Theft Switch - Door Disarm, Front Door Lock Cylinder
REMOVAL
1. Remove the driver door trim panel.
2. Position the watershield aside.
3. Remove the door disarm switch.
1
Remove the "E" clip.
2
Remove the lock rod actuator.
3
Disconnect the electrical connector.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: The door disarm switch locator mark must be positioned towards the harness side of the switch prior to installation.