Mountaineer V8-302 5.0L VIN P EFI (1998)
Volt Meter Gauge: Service and Repair
REMOVAL
WARNING: ILLUMINATION BULBS ARE PRESSURIZED AND MAY SHATTER IF IMPROPERLY HANDLED. WEAR EYE
PROTECTION WHEN REPLACING
ILLUMINATION BULBS.
CAUTION: If gauges are being removed from the cluster assembly, do not remove the gauge pointers. Magnetic gauges cannot be recalibrated.
NOTE:
-
Gauges are replaced as assemblies. They are not available individually.
-
Do not reuse instrument gauge clips.
1. Remove the instrument cluster.
2. Remove the instrument cluster gauge amplifier.
3. Remove the instrument cluster lens and mask assembly.
1
Remove the screws.
2
Remove the instrument cluster lens and mask assembly.
4. Gently remove the gauge assemblies.
NOTE: The side gauge assemblies must be removed before removing the center assembly.
INSTALLATION
1. To install, reverse the removal procedure.